Chinse Factory High Quality TBR Bus Tires, PCR Car Tires 7.50r16 Light Truck Radial Tyre Tire

• Customization: Available
• After-sales Service: Support Online
• Warranty: Support Online
• Model NO.: Chinse Factory High Quality TBR Bus Tires, PCR Car
• Diameter: 21′′- 24′′
• Tire Design: Radial Tyre
• Certification: ECE, ISO9001, DOT
• Tread Pattern: Highway Tread Pattern
• Tire Hierarchy: 18PR
• Cord Material: Steel Wire
• Inner Tube: Tubeless
• Customized: Customized
• Condition: New
• Size: 4-20tt
• Pr: 8-14pr
• Pattern Number: B1
• Standard Rim: 3.00d/6.5/8/5.50f
• Tread Depth: 8-15
• Overall Diameter: 425-935mm
• Section Width: 110-236mm
• Relevant Pressure: 380-830kpa
• Maxloading: 260-2240kg
• Transport Package: According to Customer′ S Requirement
• Specification: 1100R20
• Origin: China
• HS Code: 4001100000
• Production Capacity: 10000000 Set/Year
• Package Size: 100.00cm * 100.00cm * 100.00cm
• Package Gross Weight: 100.000kg

Product Description

TBR/PCR/OTR/Truck Tire/Tyre for Radial/Bus
825r16 825r20 900r20 1000r20 11r22.5 12r22.5 295/80r22.5 315/80r22.5 385/65r22.5 1 1100R20 TBR Tire Radial Truck Tire

 

Product display

A.suitable for all wheels
B.Good traction and braking performance
C.Good durability, anti-puncturing.
D.Applied to road with good even poor conditions
 

 

Product Parameters

SIZE	PR	PATTERN NUMBER	STANDARD RIM	TREAD DEPTH	OVERALL DIAMETER	SECTION WIDTH	RELEVANT PRESSURE	MAXLOADING
					mm	mm	Kpa	Kg
4.00-8TT	8PR	B1	3.00D	8	425	110	380	260
4.00-12TT	8PR	B1	3.00D	8	535	110	420	420
5.00-14TT	10PR	B1	4J	9	615	140	500	605
6.00-13TT	8PR	B1	4.50B	9	655	170	420	650
6.00-14TT	8PR	B1	4 1/2J	9	680	170	420	690
6.00-15TT	8PR	B1	4.50E	9	705	170	420	730
6.00-16TT	10PR	B1	4.50E	9	730	170	530	850
6.50-14TT	8PR	B1	4 1/2J	10	705	180	420	775
6.50-15TT	8PR	B1	4.50E	10	730	180	420	825
6.50-16TT	10PR	B1	5.50F	10	750	185	530	975
6.50-16TT	12PR	B1	5.50F	10	750	185	630	1060
6.50-16TT	14PR	B1	5.50F	10	750	185	730	1150
6.50-16TT	8PR	B1	5.50F	10	750	185	420	850
7.00-15TT	10PR	B1	5.50F	11	750	200	530	1030
7.00-15TT	14PR	B1	5.50F	11	750	200	730	1250
7.00-16TT	10PR	B1	5.50F	11	775	200	530	1090
7.00-16TT	12PR	B1	5.50F	11	775	200	630	1215
7.00-16TT	14PR	B1	5.50F	11	775	200	730	1320
7.00-16TT	16PR	B1	5.50F	11	775	200	830	1430
7.00-20TT	10PR	B1	5.5	13	904	200	630	1450
7.00-20TT	14PR	B1	5.5	13	904	200	840	1750
7.50-16TT	12PR	B1	6.00G	12	805	215	630	1400
7.50-16TT	14PR	B1	6.00G	12	805	215	730	1500
7.50-16TT	16PR	B1	6.00G	12	805	215	830	1600
7.50-20TT	14PR	B1	6	15	935	215	810	1900
8.25-20TT	14PR	B1	6.5	14	974	236	810	2240

 

Certifications

 

 

Company Profile

ZAOZHUANG DINGNA INTERNATIONAL TRADE CO., LTD. is located in ZaoZhuang city, Shandong Province of China. Since 1996, we have been in the field of tyres and wheels business activities. Depending on self-accumulation and parties support, our company supplies full range of tyres including TBR, PCR, TBB, OTR, Agricultural tyres and Industrial tyres, also supplies assembling series of tyres with wheel/rims.
Correlative products successively passed ISO9001 quality system certification, China CCC production quality certification, United States DOT certification, Europe Union ECE product certification, Brazil INMETRO certification, Gulf GCC certification, etc..

With fairly strong capacity of research and development, the tyres main performance index of tyres has reached international advanced level. We are pleased that our products and services have been seen all over the world, including North America, Europe, Africa, Australia, South and Middle America, South and East Asia, and Middle East. With excellent quality, reasonable price, prompt delivery, warm and thoughtful services, we are confident that we will be your best supplier and partner in China.

Welcome to ZAOZHUANG DINGNA INTERNATIONAL TRADE CO., LTD. Please contact with us and let's work together. We believe that we will establish a long-term good business relationship through discussion and cooperation.
 

Recommend Products

GUIDELINE ON HOW TO USE TYRES

1.Tyre and Rim

(1)Check carefully before tyre mounting to see if the rim sizes are identical to thosemarked on sidewalls.
(2) The tyre should be fitted as much as possible to standard rims or allowable rim range.(3) The tyre should not be fitted to deformed rims or non-conformity rims.Warning:
Deformed rims or non-conformity rims will result in premature tyre toe failure or blow outto hurt People.

2.Inflated Pressure

(1)Rules should be followed to inflate the tyre (Figure1)(2)lt is not appropriate to inflate the tyre over pressure and then release the air tostandard pressure.
(3)Check the tyre pressure regularly and replenish when the air pressure is not foundSufficient.
Warning:Tyre under-pressure will cause decreased loading capacity, easy cord breaking anddangerous blow out ,Tyre overpressure will cause cord strength loss and dangerous blow out.

3.Load

(1) Select the tyre of correspaonding ply rating and load based on the vehicle's standard
loading capacity.(2) The tyre of low ply rating can not bear high load. The tyre load mn not be increasedby the increase of inflated pressure.
(3)The load should be distributed evenly on the vehicle.(Figure2)Warning:Overload will cause a serious injury to the tyre or the People. The vehicle with the loadunevenly distributed will cause some of tyres serious overload, which is one of the factorscausing accidents.

4.Speed

The tyre should match the vehicle in operating speed and operate in the range ofspecified speed for vehicle.
Warning:Over speed will cause quicker tread wear, rapid heat build up, tyre strength deterioration.separations and even tyre blow out.

5.Tyre Mounting
(1)Tyres of same specifications, ply ratings and tread patterns must be mounted on thesame axle. The original tyre differs from the replaced tyre in height not more than 3%.
(2)Dual tyre rim ventilating holes should be in alignment with each other. Tyre valvesshould be positioned at 180 to each other. Dual spacing should be more than 20mmunder static load.
(3)Tyre toe-in should be adjusted to a standard value.(4)When the old tube is used, its outer circumference should not be over 92% of theinner circumference of the tyre. lt is recommenbed that the old tube with more than 2repair patches should not remain in use.(5)The rim should be tightly and evenly bolted into position.(6) As to tyres of directional tread patterns, the direction marked on sidewalls should beidentical to the direction of vehicle travel.Warning:
Tyres of diferent specifications, ply ratings and tread patterns mounted on the same axlewill deteriorate comprehensive tyre performances. Smaller dual spacing will cause easyheat build up due to the friction between two tyres and cause premature tyre failure. Thetyre toe-in poorly adjusted will cause vehicle,s poor directivity, tyre side slip. severe treadwear and increased fuel cost. Too big circumference of the old tube will cause the tubefolded inside the tyre and tyre blow out.

6.Pre-ride of tyres
When new tyres have been mounted, the pre-ride should be taken below 50km/h for200km for normal tyres .Through the pre-ride newtyres will adapt to deformation, remove the stress caused during manufacturingdecrease heat build up and extend tyre performance life.

7.Others
(1)Quick start up, urgent braking, sharp turning, striking by sharp obstaclescontacts with corrosives and oil contaminants, operation in high temperature, etc.
will cause premature tyre failures.(2)Tyres should be well maintained and regularly shifted (Figure 3). The sharpobstacles punctured into lyres or the stones clogged in tread channels sbecid beremoved immediately.
(3) When the tyre tread has worn out to the extent specified, stop using it.(4) lf there is any problem regarding tyre quality, please do not hesitate to contactthe tyre dealers or us to enable solving the problems immediately.

Packaging & Shipping

 

FAQ

 

1. How to ship?
1). FOB,CIF terms, we will effect shipment and furnish the master bill of lading issued by shipping line.
2). FOB items, buyer should nominated shipping line or shipping agency in China.
3). Shipped by train , we will discuss with buyer to get agreement on details.

2. How about the quality?
1). Best quality tires.
2). Best Parterns: Rubber from Malaysia & Thailand top-quality Natural and synthetic rubber.

3. How about the delivery?
If the products you need are all stock available, we will arrange shipment within 3-5 days, once receiving your down payment. If the products you need is out of stock, we will arrange production asap, normally, the shipment will be effected within 15-30 days.

4. How about the warranty?
Any tire with a complete serial number is covered against defects in workmanship and material for 2 YEARS from the date of purchase. After that time, the warranty is terminated.
Notice: The tire age calculated from the date of purchase, If the proof of purchase is not available, the tire date of manufacture will be applied.